archival and resource material for human powered recumbent tricycles

Recumbent Trike Trip Through The Park

Here is the trike:

Advertisements

7 responses

  1. Down Wind Dan

    HI Steve, nice bouncy wheel, but it sounds like one of your shifters is mis aligned.

    September 3, 2015 at 4:33 pm

  2. daytriker

    I doubt that is Steve’s Trike. Looks to me like a Ti-Trike?

    September 3, 2015 at 5:17 pm

  3. That’s not Steve’s ICE Full Fat, That’s a Steintrike, ICE does not have that cross member suspension, and ICE uses a solid elastomer type suspension that looks like over sized plugs colored either yellow, green, or red, where each color denotes a specific strength.. And Steintrikes uses shocks …
    Armadillozack

    September 4, 2015 at 3:37 am

  4. Hay daytriker,,,,, I don’t think thats a shifter mis aligned, I think that it is a Steintrikes front wheel drive universal joint and spider gear mesh making that noise…I still think it’s a Steintrike still..
    All we need now is to hear from the Grand Exalted, Grand Wazo, Steve..And maybe he will shed some light on this strange oddity…!

    September 4, 2015 at 3:58 am

  5. Desert Dune

    Hello Armadillozack and Daytriker, You are both correct. That is not Steve’s trike. The video was made by Risch Enterprizes, and their YouTube website can be found at this link:
    https://www.youtube.com/channel/UC4hGhLQ7D4xSDBp5XhcrSnQ
    Desert Dune

    September 4, 2015 at 10:01 am

  6. Desert Dune

    Here is another video from YouTube by Risch Enterprizes that shows the trike in question:

    September 4, 2015 at 10:05 am

  7. I was just looking at the laser that they use to cut parts for this trike, and it’s a Humdinger for sure.. I had the privilege to see one of it’s kind in action, and I tell you that their margins are down to the unthinkable in measurements of tolerances of a millionth with out error… It does have to allow for the focus of the beam and to it’s size at the firing point. But when fired it has a cutting point that only can be analyzed by a microscope, and hence the tolerances in which it may claim.. So I do not know how Steintrikes can be sold so low in price unless they own their laser… Which the cost of the laser alone, is to high to even think about.. Or they have a division of a major corporation in which back’s the making of these phenomenal trikes… So in a nut shell the Steintrike is a very formidable company in it’s own rite.. And on the negative side all of this, the trike weighs out to be a very heavy trike….!

    Armadillozack

    September 5, 2015 at 8:37 am